Flooroxy Tile Grout

Hotels & Restaurants, Hospitals, Industries

Resorts & Malls ,Showrooms

Bungalows, Flats , Swimming pools ,Bathrooms ,Bedroom & Kitchens ,hall & living room much more..

Flooroxy’s Premium Epoxy can be use for both Residential and Commercial use as it is 100% waterproof , chemical resistant and comes with Higher Strength at a very Reasonable Rate.

We Provide best quality of Resin , Hardener , Filler due to which once properly filled in tile gaps bond with tiles like never before

Also gives your floor a aesthetic and appealing look

Looks rich, premium and classy

1kg set includes 900grm of Resin & 100grm of Hardener

use it Before 12 Months

If stored at Temprature >32O F(000 ℃) and < 110O F( 430 ℃)

Flooroxy Tile Grout is a Factory proportioned 2 component grout kit with Part A Resin and Part B Hardener

The Tile Surface Should be Dust free and Dirt free before applying Grout also acid cleaners should not be used while cleaning surface

Pour all the hardener, component B, into a bucket contains component A. Mix well until a smooth paste is obtained. For Perfect mixing and avoiding overheating of the mixture, use a low speed stirrer.

Immediately pour contents of bucket into working area. Be sure all grout joints are packed full. Remove excess material as possible before initial cleaning with grout float. Do not leave excess grout on the face of tile.

After 35-40 minutes of applying grout scrub the surface of tile joint with clean Water and remove all the excess grout than take a thick cloth and remove all residue if any .

Now after 5-8 hours do a final cleaning with normal soap Detergent to remove any haze or remaining grains from grout

Pot life : 45 min.
Foot Traffic : 24 hrs.
Heavy Traffic : 72 hrs.
Specification Subject to change without notification results shown are typical but reflect test procedures used. Actual field performance will depend on installation methods and site condition.